Plush Pile Polypropylene Mat With Rubberised PVC Backing and Borders
| Surface | Polypropylene |
| Backing | Vinyl |
| Thickness | 7mm |
Made from 100% Polypropylene with a PVC vinyl backing this mat is suitable for light traffic applications. The 100% polypropylene surface absorbs moisture from light spills and dries through natural evaporation ans well as removing light soil from pedestrian feet as they walk over the mat.
Long Lasting Colour
With an attractive solution dyed plush cut pile carpet surface available in three colours ensures colour fastness for the life of the mat and will not fade under normal use. Each of the colours has a darket fleck throughout to hide dirt and debris ensuring the mat looks and functions to its maximum capacity when in surface.
Easy to Clean
The Polypropylene mats is easy to clean with a periodic vacuum and a spot clean when required (see the Cleaning Instructions Tab for details)
| Surface | Polypropylene |
| Backing | Vinyl |
| Thickness | 7mm |
Floor Preparation
Prior the mat being put into service, both when new and after cleaning, we recommend the floor is cleaned to remove dust and dirt. Ensure both the mat and floor are completely dry before placing the mat back down.
Daily Maintenance
Where possible, we recommend the mat is vacuumed daily or weekly in low foot-traffic areas.
Routine Maintenance
Spots and non-permanent stains should be removed as needed, ensuring to rinse thoroughly and allow the mat to dry before returning to service.
Periodically, as needed, the mat should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain and dry completely.
Deep cleaning
The mat may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible, and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to dry completely before returning to service.
Storage
We recommend the mat to be stored flat whenever possible. If the mat is to be rolled, it is advised that it is rolled carpet side out, and only be left in this position for a short amount of time.