This dual level polypropylene diamond pattern entrance mat is designed to trap a large amount of water and also clean the shoes from light soil. The channels in the mat are designed to hide trapped debris from the surface to prevent the following person walking the trapped dirt into your building. The attractive diamond design is reinforced with rubber so it will not crush meaning that the mat remains attractive and fully functional for its entire life.
The 100% hardwearing surface is thermally bonded to a natural rubber backing and has a non trip rubber border on all sides. The border is slightly higher than the lowest point creating a dam effect, this is ideal for trapping moisture and debris and containing it in the mat. The poly propylene surface will dry through natural evaporation.
As this heavy duty rubber backed mat will trap a lot of moisture and debris, to ensure that you get the longest possible life out of your Entrance Mat it important that you extract this from the mat, for full details and instructions please visit the Cleaning Instructions tab.
The dual level diamond design mat is suitable for Medium to High traffic areas.
Prior the mat being put into service, both when new and after cleaning, we recommend the floor is cleaned to remove dust and dirt. Ensure both the mat and floor are completely dry before placing the mat back down.
Where possible, we recommend the mat is vacuumed daily or weekly in low foot-traffic areas.
Spots and non-permanent stains should be removed as needed, ensuring to rinse thoroughly and allow the mat to dry before returning to service.
Periodically, as needed, the mat should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain and dry completely.
We recommend the mat to be stored flat whenever possible. If the mat is to be rolled, it is advised that it is rolled carpet side out, and only be left in this position for a short amount of time.