The Heavy Duty Ribbed Polypropylene mat for High Traffic Entrances is a great mat that will scrape debris, dirt and sand from feet and trap it in the mat. This prevents these particles from entering your building preventing potential accidents from occurring from slips and falls. The Bi Level construction is higher and coarser than similar alternatives, however being thicker means that the mat is more effective in scraping process.
Mat thickness - 9.5mm With a thick ribbed carpet surface is made from 100% Polypropylene and has a mixture of both soft and coarse fibres to work as a scraping and drying mat. This means the mat will not only scrape the feet and light wheeled traffic clean it will also dry as they pass over the mat.
With this unique construction, the mat will dry quickly and will dry through natural evaporation. The backing is a rubberised PVC which holds the mat in place on a variety of surfaces. This mat is designed for Medium to High Traffic applications.
Pricing includes edging. Please contact us should you require it unedged for recessing.
Prior the mat being put into service, both when new and after cleaning, we recommend the floor is cleaned to remove dust and dirt. Ensure both the mat and floor are completely dry before placing the mat back down.
Where possible, we recommend the mat is vacuumed daily; weekly in low foot-traffic areas.
Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. Ensure to rinse thoroughly and dry the mat before returning to service.
Periodically, as needed, the mat should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain and dry completely.
The Mat may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible, and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to dry completely before returning to service.
We recommend the mat to be stored flat whenever possible. If the mat is to be rolled, it is advised that it is rolled carpet side out, and only be left in this position for a short amount of time.